=====================  Product Identification  =====================

Product ID:PENNZOIL HD MOTOR OIL SAE 10W-40
MSDS Date:06/19/1990
FSC:9150
NIIN:00F020236
MSDS Number: BMJBQ
=== Responsible Party ===
Company Name:PENNZOIL CO
Box:2967
City:HOUSTON
State:TX
ZIP:77252-2967
Info Phone Num:(713) 236-6070
Emergency Phone Num:(713) 236-6070
CAGE:01326
=== Contractor Identification ===
Company Name:PENNZOIL CO
Address:700 MILIAM PENNZOIL PL
Box:2967
City:HOUSTON
State:TX
ZIP:77252-2967
Country:US
Phone:800-546-6227
CAGE:01326

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLEUM DISTILLATE, PETROLEUM OIL, BASE OIL	       
    AROMATIC PETROLEUM SOLVENT
CAS:8002-05-9
RTECS #:SE7175000
Fraction by Wt: 75-85%
Other REC Limits:10 MG/CUM STEL
OSHA PEL:5 MG/CUM MIST
ACGIH TLV:5 MG/CUM MIST

Ingred Name:DETERGENT INHIBITOR SYSTEM
Fraction by Wt: 5-15%

Ingred Name:VISCOSITY INDEX IMPROVER
Fraction by Wt: 5-15%

Ingred Name:POUR POINT DEPRESSANT
Fraction by Wt: <1%

Ingred Name:ZINC
CAS:7440-66-6
RTECS #:ZG8600000
Fraction by Wt: 1.7%
ACGIH TLV:10 MG/CUM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, DERMATITIS, DRYNESS,
    CHAPPING, REDDENING, OIL ACNE, BLACKHEADS, & PHOTOSENSITIVITY.
    INGESTION: LAXATIVE PROPERTIES INCLUDING ABDOMINAL CRAMPS &
    DIARRHEA. INHALATION: PULMONARY DISEAS E SUCH AS CHRONIC LUNG
    INFLAMMATION, SHORTNESS OF BREATH, & COUGH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION, DERMATITIS, DRYNESS,
    CHAPPING, REDDENING, OIL ACNE, BLACKHEADS, & PHOTOSENSITIVITY.
    INGESTION: LAXATIVE PROPERTIES INCLUDING ABDOMINAL CRAMPS, &
    DIARRHEA. INHALATION: PULMONARY DISEA SE SUCH AS LUNG INFLAMMATION,
    SHORTNESSOF BREATH, & COUGH.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER UNTIL IRRITATION SUBSIDES. IF MATERIAL IS
    HOT, TREAT FOR THERMAL BURNS. SKIN: WASH W/SOAP & WATER. IN
    MATERIAL IS HOT, SUBMERGE INJURED AREA IN COLD WATER. INHALATION:
    REMOVE TO FR ESH AIR. INGESTION: DON'T INDUCE VOMITING. OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>385F
Extinguishing Media:DRY CHEMICAL, FOAM, OR CO2
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. USE CAUTION
    WHEN USING WATER OR FOAM AS FROTHING MAY OCCUR WHEN SPRAYED INTO
    CONTAINERS OF HOT, BURNING LIQUID.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
    BURNING. AUTOIGNITION TEMPERATURE: >800F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL IMMEDIATELY. REMOVE ALL SOURCES
    OF IGNITION. ABSORB W/INERT MATERIAL SUCH AS SAND OR CLAY. PICK UP
    USING VACUUM PUMPS, SHOVELS, BUCKETS, OR OTHER MEANS & PLACE IN
    DRUMS OR OTHER SUITABLE  CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T TRANSFER TO UNMARKED CONTAINERS.
    STORE AWAY FROM HEAT SOURCE. AVOID CONSUMPTION OF FOOD/BEVERAGE IN
    WORK AREAS WHERE HYDROCARBONS ARE PRESENT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE A NIOSH APPORVED ORGANIC VAPOR RESPIRATOR
    W/DUST & MIST FILTER WHERE VAPOR OR MIST IS GENERATED. DON'T USE
    COMPRESSED OXYGEN IN HYDROCARBON ATMOSPHERES.
Ventilation:ADEQUATE W/GOOD ENGINEERING PRACTICE TO MAINTAIN 800F
Melt/Freeze Pt:M.P/F.P Text:-25F
Spec Gravity:0.875
Solubility in Water:EMULSIFIES
Appearance and Odor:CLEAR TO LIGHT-RED W/LUBRICATING OIL ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, & OTHER SOURCES
    OF IGNITION
Hazardous Decomposition Products:CO, CO2, & OTHER OXIDES

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MAY BE LANDFILLED OR INCINERATED
    AT AN APPROVED FACILITY ACCORDING TO FEDERAL, STATE, & LOCAL
    REGULATIONS. MATERIALS SHOULD BE RECYCLED IF POSSIBLE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.